How to create a fancy wire wrapped pendant

Step One

Using round nosed pliers position them close to the end of one 3 inch length of the 1.0mm wire and make a loose coil. Then thread on a gemstone.

Step Two

Place the round nosed pliers on the other end of the wire and repeat a loose coil; this will create an s shaped coil with a gemstone sandwiched in between.

Step Three

Repeat step one and step two with two other 3 inch long pieces of 1.0mm wire to make a total of three similar s shaped coils.

Step Four

Using the 0.4mm wire, begin to wrap two coils together where the coils meet. Wrap the 0.4mm wire around both 1.0mm wires approximately 5 times to secure, make sure the wraps do not overlap. Do not cut the wire at this stage, move to another area and continue to wrap and join all three S coils to create the pendant.